MAKITA DHP490RF, 18V HAMMER DRILL DRIVER (1PC 3.0AH BATTERY, 1PC CHARGER)

The tool delivers the maximum torque of 65 N·m. With its lightweight and compact design
Provides increased efficiency with the maximum no-load speed of up to 1,900 rpm.
The 20-stage torque settings allow for fine adjustments to suit the task at hand.
A mechanical 2-speed gearing allows for choosing between maximum rpm or higher torque.
Three action modes are available: Drilling, Hammer drilling, and Screwdriving

Capacity:
- Masonry: 13 mm (1/2″)
- Steel: 13 mm (1/2″)
- Wood: 38 mm (1-1/2″)
Chuck capacity: 13 mm (1/2″)
Impacts per minute:
- Hi: 0 – 28,500 min⁻¹
- Lo: 0 – 7,500 min⁻¹
No load speed (rpm):
- Hi: 0 – 1,900
- Lo: 0 – 500
Max. fastening torque:
- Hard / Soft: 50 / 27 N·m
Max Torque: 65 N·m (580 in.lbs)
Dimensions (L x W x H): 172 x 81 x 237 mm (6-3/4 x 3-3/16 x 9-3/8″)
Net weight: 1.4 – 1.7 kg (3.1 – 3.7 lbs.)

Weight	3 kg
Dimensions	167 × 79 × 232 cm
Brands	MAKITA
Power Tool Categories	Hammer Drill (Steel, Wood, Masonry)
Power Source	18V, Brushless Series
Shank	Straight Shank